Classes and Training Seminars

Want to schedule a class at your location? Call 888.414.6682.

<   1 2 3 4 5 6 7 8 9 10 ...   >  >|
Page of 16
Showing 21 - 30 of 154

Core Tools: Measurement Systems Analysis (CEU Credits: .7)

October 23, 2019
8:00 AM- 5:00 PM
Plymouth, MI

Project conducted to assist company in Process Improvements and Quality Standards.

Blueprint Reading (CEU Credits: .7)

October 24, 2019
8:00 AM- 5:00 PM
Plymouth, MI

This one-day interactive course will help equip participants with the skills needed to read and interpret 2D prints (engineered drawings).

Total Productive Maintenance/Quick Changeover

October 28, 2019
8:00 AM- 5:00 PM
Plymouth, MI

This class is designed to show the importance of teamwork and integration between production and maintenance department, which then leads to higher productivity, better quality and increased profits.

A3 Problem Solving

October 29, 2019
8:00 AM- 12:00 PM
Plymouth, MI

Participants will use problem solving tools (5-Whys and Fishbone Diagram) to assist in the continual improvement process with special emphasis on creating and implementing a Lean Business Strategy

Advanced Problem Solving: Lean Six Sigma Yellow Belt (CEU Credits: 2.1)

October 29, 2019
8:00 AM- 5:00 PM
Plymouth, MI

Develop the skills necessary to become a critical part in your organization’s quality improvement initiatives. Gain a strong foundation of the Lean and Six Sigma methodologies with this three-day course.

Error-Proofing / POKA-YOKE

October 29, 2019
1:00 PM- 5:00 PM
Plymouth, MI

Understand the benefits of building in quality at the source by implementing methods or devices into the manufacturing process instead of inspection only at the end of the process.

Lean Six Sigma Green Belt Certification (CEU Credits: 5.6)

November 04, 2019
8:00 AM- 5:00 PM
Plymouth, MI

Lean Six Sigma Green Belt Certification develops the skills of the internal change agent through approach of implementing the proven methods of both Lean and Six Sigma.

GD&T Fundamentals

November 08, 2019
8:00 AM- 5:00 PM
Plymouth, MI

Attendees will also learn how GD&T saves money over traditional tolerances and how to interpret each of the 14 symbols.

IATF 16949 Internal Auditor (CEU Credits: 2.8)

November 12, 2019
8:00 AM- 5:00 PM
Plymouth, MI

Learn the information necessary for conducting internal quality audits.

Manufacturing Skills Development (CEU Credits: 1.4)

November 12, 2019
8:00 AM- 5:00 PM
Plymouth, MI

This training is designed for students who are new to the manufacturing environment. Manufacturing Skills Development will provide a foundational understanding of the processes, approach and culture needed to run an effective and efficient operation.

<   1 2 3 4 5 6 7 8 9 10 ...   >  >|
Page of 16
Showing 21 - 30 of 154