Classes and Training Seminars

Want to schedule a class at your location or get notified about a particular course? Call 888.414.6682 or email us at the link below.

<   1 2 3 4 5 6 7 8 9 10 ...   >  >|
Page of 15
Showing 91 - 100 of 149

Core Tools: Statistical Process Control (CEUs: .7)

July 18, 2024
8:00 AM- 5:00 PM
Plymouth, MI

Participants run a group of sequentially produced parts and then measure them to determine average, range and sigma.

VIRTUAL CLASS: 8D Problem Solving

July 18, 2024
8:00 AM- 12:00 PM
,

Root cause analysis and problem-solving tools are presented and demonstrated in this virtual session.

Total Productive Maintenance/Quick Changeover

July 23, 2024
8:00 AM- 5:00 PM
Plymouth, MI

This class is designed to show the importance of teamwork and integration between production and maintenance department, which then leads to higher productivity, better quality and increased profits.

This 24-hour interactive course will equip participants with the knowledge and skills needed become effective leaders and supervisors. The participants will be acquainted with skills and tools to relate to subordinates, peers and their managers.

Introduction to Additive Manufacturing

August 01, 2024
8:00 AM- 5:00 PM
Plymouth, MI

This interactive course focuses on the fundamentals of using a FDM printer. Upon completion of the course, graduates will have a working knowledge of 3D printing with hands on experience in utilizing the printer, diagnosing and improving 3D prints.

Battle Tested Safety Tools

August 02, 2024
8:00 AM- 5:00 PM
Plymouth, Michigan

This 8-hour interactive course will equip participants with knowledge, skills and armed with battle tested, practical, and user-friendly non-conventional tools, techniques, tactics and routines to: Diagnose root causes of safety challenges an organization

Blueprint Reading (CEUs: .7)

August 02, 2024
8:00 AM- 5:00 PM
Plymouth, MI

This one-day interactive course will help equip participants with the skills needed to read and interpret 2D prints (engineered drawings).

Blueprint Reading for Welders

August 02, 2024
8:00 AM- 5:00 PM
Plymouth, MI

This course is designed for those who need an intro to drawing interpretation. A special focus on the most commonly encountered welding symbols on prints will be presented with the context of GD&T that is primarily affected perpendicularity and flatness.

Core Tools: APQP, PPAP & FMEA (CEUs: 1.4)

August 05, 2024
8:00 AM- 5:00 PM
Plymouth, MI

The course blends the three core tools of APQP, PPAP and FMEA and guides participants through important steps of the launch process.

Human Machine Interaction & Digital Process Control

August 06, 2024
8:00 AM- 5:00 PM
Plymouth, MI

basic understanding of the various benefits of human to machine interaction and digital process controls within the manufacturing environment as well as the technologies required.

<   1 2 3 4 5 6 7 8 9 10 ...   >  >|
Page of 15
Showing 91 - 100 of 149