Classes and Training Seminars

Want to schedule a class at your location or get notified about a particular course? Call 888.414.6682 or email us at the link below.

<   1 2 3 4 5    >
Page of 5
Showing 1 - 10 of 49

8D Problem Solving (CEUs: .7)

May 01, 2024
8:00 AM- 5:00 PM
Benton Harbor, MI

Root cause analysis and problem-solving tools are presented and demonstrated in this session. Both internal and external problems are introduced.

GD&T Fundamentals

May 07, 2024
8:00 AM- 5:00 PM
Plymouth, MI

Attendees will also learn how GD&T saves money over traditional tolerances and how to interpret each of the 14 symbols.

Manufacturing Skills Development (CEUs: 1.4 | PDCs: 14)

May 09, 2024
8:00 AM- 5:00 PM
Benton Harbor, MI

This training is designed for students who are new to the manufacturing environment. Manufacturing Skills Development will provide a foundational understanding of the processes, approach and culture needed to run an effective and efficient operation.

IATF 16949 Internal Auditor (CEUs: 2.8)

May 13, 2024
8:00 AM- 5:00 PM
Plymouth, Michigan

Learn the information necessary for conducting internal quality audits.

Blueprint Reading for Welders

May 15, 2024
8:00 AM- 5:00 PM
Benton Harbor, MI

This course is designed for those who need an intro to drawing interpretation. A special focus on the most commonly encountered welding symbols on prints will be presented with the context of GD&T that is primarily affected perpendicularity and flatness.

Core Tools: APQP, PPAP & FMEA (CEUs: 1.4)

May 21, 2024
8:00 AM- 5:00 PM
Sterling Heights, MI

The course blends the three core tools of APQP, PPAP and FMEA and guides participants through important steps of the launch process.

Blueprint Reading (CEUs: .7)

May 23, 2024
8:00 AM- 5:00 PM
Plymouth, MI

This one-day interactive course will help equip participants with the skills needed to read and interpret 2D prints (engineered drawings).

Blueprint Reading for Welders

May 23, 2024
8:00 AM- 5:00 PM
Plymouth, MI

This course is designed for those who need an intro to drawing interpretation. A special focus on the most commonly encountered welding symbols on prints will be presented with the context of GD&T that is primarily affected perpendicularity and flatness.

Core Tools: Statistical Process Control (CEUs: .7)

June 05, 2024
8:00 AM- 5:00 PM
Plymouth, MI

Participants run a group of sequentially produced parts and then measure them to determine average, range and sigma.

8D Problem Solving (CEUs: .7)

June 10, 2024
8:00 AM- 5:00 PM
Plymouth, MI

Root cause analysis and problem-solving tools are presented and demonstrated in this session. Both internal and external problems are introduced.

<   1 2 3 4 5    >
Page of 5
Showing 1 - 10 of 49