Classes and Training Seminars

Want to schedule a class at your location or get notified about a particular course? Call 888.414.6682 or email us at the link below.

<   1 2 3 4 5    >
Page of 5
Showing 21 - 30 of 42

8D Problem Solving (CEUs: .7)

September 11, 2024
8:00 AM- 5:00 PM
Plymouth, MI

Root cause analysis and problem-solving tools are presented and demonstrated in this session. Both internal and external problems are introduced.

Blueprint Reading (CEUs: .7)

September 17, 2024
8:00 AM- 5:00 PM
Plymouth, MI

This one-day interactive course will help equip participants with the skills needed to read and interpret 2D prints (engineered drawings).

Blueprint Reading for Welders

September 17, 2024
8:00 AM- 5:00 PM
Plymouth, MI

This course is designed for those who need an intro to drawing interpretation. A special focus on the most commonly encountered welding symbols on prints will be presented with the context of GD&T that is primarily affected perpendicularity and flatness.

VIRTUAL CLASS: 8D Problem Solving

September 18, 2024
8:00 AM- 12:00 PM
,

Root cause analysis and problem-solving tools are presented and demonstrated in this virtual session.

Core Tools: Measurement Systems Analysis (CEUs: .7)

September 20, 2024
8:00 AM- 5:00 PM
Plymouth, MI

Project conducted to assist company in Process Improvements and Quality Standards.

IATF 16949 Internal Auditor (CEUs: 2.8)

September 23, 2024
8:00 AM- 5:00 PM
Plymouth, Michigan

Learn the information necessary for conducting internal quality audits.

GD&T Fundamentals

September 27, 2024
8:00 AM- 5:00 PM
Plymouth, MI

Attendees will also learn how GD&T saves money over traditional tolerances and how to interpret each of the 14 symbols.

AS13000 8D Problem Solving

October 08, 2024
8:00 AM- 5:00 PM
Plymouth, MI

This training will orient participants to the AS13000 Problem Solving basics and 8-D reporting methods. Discussions, Case Studies and activities involving problem solving tools are part of this seminar.

AIAG-VDA Process FMEA for Practitioners (CEUs: 1.4)

October 10, 2024
8:00 AM- 5:00 PM
Kalamazoo, MI

After attending this course, participants will have the tools needed to objectively evaluate the effectiveness of their current FMEA process while planning and using the new AIAG-VDA-FMEA process.

Core Tools: APQP, PPAP & FMEA (CEUs: 1.4)

October 14, 2024
8:00 AM- 5:00 PM
Plymouth, MI

The course blends the three core tools of APQP, PPAP and FMEA and guides participants through important steps of the launch process.

<   1 2 3 4 5    >
Page of 5
Showing 21 - 30 of 42