Classes and Training Seminars

Want to schedule a class at your location or get notified about a particular course? Call 888.414.6682 or email us at the link below.

<   1 2 3 4 5    >
Page of 5
Showing 31 - 40 of 42

ISO 9001:2015 Lead Auditor

October 14, 2024
8:00 AM- 5:00 PM
Plymouth, Michigan

This four day, highly interactive course will equip participants with the knowledge and skills needed to plan, lead an audit team and report the results using the requirements of ISO 9001 as audit criteria.

ISO 9001:2015 Internal Auditor (CEUs: 2.1)

October 16, 2024
8:00 AM- 5:00 PM
Plymouth, MI

Learn the information necessary for conducting internal quality audits.

Core Tools: Statistical Process Control (CEUs: .7)

October 21, 2024
8:00 AM- 5:00 PM
Plymouth, MI

Participants run a group of sequentially produced parts and then measure them to determine average, range and sigma.

GD&T Fundamentals

November 01, 2024
8:00 AM- 5:00 PM
Plymouth, MI

Attendees will also learn how GD&T saves money over traditional tolerances and how to interpret each of the 14 symbols.

VIRTUAL CLASS: 8D Problem Solving

November 01, 2024
8:00 AM- 12:00 PM
,

Root cause analysis and problem-solving tools are presented and demonstrated in this virtual session.

GD&T Comprehensive

November 11, 2024
8:00 AM- 5:00 PM
Plymouth, MI

Participants in this two-day comprehensive seminar will learn how to explain and evaluate the benefits of GD&T.

ISO 14001:2015 Internal Auditor (CEUs: 1.4)

November 14, 2024
8:00 AM- 4:00 PM
Plymouth, MI

Learn the information necessary for conducting internal environmental audits.

AIAG-VDA Process FMEA for Practitioners (CEUs: 1.4)

November 18, 2024
8:00 AM- 5:00 PM
Plymouth, MI

After attending this course, participants will have the tools needed to objectively evaluate the effectiveness of their current FMEA process while planning and using the new AIAG-VDA-FMEA process.

Blueprint Reading for Welders

November 20, 2024
8:00 AM- 5:00 PM
Plymouth, MI

This one-day interactive course will help equip participants with the skills needed to read and interpret 2D prints (engineered drawings).

Blueprint Reading for Welders

November 20, 2024
8:00 AM- 5:00 PM
Plymouth, MI

This course is designed for those who need an intro to drawing interpretation. A special focus on the most commonly encountered welding symbols on prints will be presented with the context of GD&T that is primarily affected perpendicularity and flatness.

<   1 2 3 4 5    >
Page of 5
Showing 31 - 40 of 42